Steam Carpet Cleaning is one of the popular methods of cleaning carpets both in domestic and commercial buildings. When done right, steam cleaning can effectively remove dirt and odor from carpets while it is also effective in removing normal stains. If you are looking to do this method, steam carpet cleaning requires some industrial grade equipment along with some cleaning agent in order to properly clean the carpet.
It is recommended that the material strength of the carpet should be determined before applying the process on the carpet. Sometimes the fibers of the carpet may shrink as a response to the hot steam; therefore, an appropriate setting should be set for steam on the equipment before initiating the process. A proper understanding of the equipment and the process should be acquired so that the effectiveness of the cleaning process can be maximized. In this article, we will explain the steam cleaning process so that the individuals can perform it optimally in commercial and residential buildings.
Supplies Needed to Perform Steam Cleaning Process
There are a few standard supplies needed to perform the steam cleaning process. Some of the common supplies needed in a steam carpet cleaning process are as follows:
- Vacuum Cleaner: A vacuum cleaner will be required in order to remove the dust particles from the carpet before performing the steamer.
- Steam Cleaner: A steam cleaner will be required to apply the steam to the carpet. The steamer will have a water chamber where the cleaning agent can also be added.
- Cleaning Agent: An appropriate cleaning agent may be used in order to remove the stains and odor from the carpet.
- Scrubbing Pads: The pads are usually attached to the bottom of the steamer machine for cleaning the stains. Separate scrubbers can also be used in order to remove the stains.
Steam Carpet Cleaning Process
Following steps are involved in the steam carpet cleaning process:
- In the first step, vacuum clean the carpet so that dirt particles can be removed.
- Now, add water and the cleaning agent in the chamber of the steam cleaner. A suitable cleaning agent or vinegar can be used for the purpose.
- Gradually move the steamer in stripes to all parts of the room starting from one end.
- Make sure that all areas of the carpet have been properly steamed.
- Now, let the cleaning agent crystallize the dust particles. After some time, vacuum clean the carpet again.
- If there are stains on the carpet then make sure to scrub them after steaming.
- Dry the carpet properly after the odor and stains have been removed.
